BehringerSYSTEM 55 Analog Modular Synthesizer

Behringer SYSTEM 55

Bring monster-sized vintage modular magic to your studio with the impressive Behringer System 55, a fully Eurorack compatible modular system with an expansive 38 modules. Empower your studio with near limitless patching potential, combining the comprehensive set of tools in the System 55 to craft detailed soundscapes, massive synth tones, and more. The System 55 features six basic VCOs with LFO capability, with an oscillator driver for each set of three for common frequency and PWM control, oscillator controllers for mixing and switching CV sources, attenuators, and mixers for waveshaping. There is also a fully featured 921 VCO, providing an immense amount of sound sources for polyphonic patches, huge detuned unisons, and more.

Sculpt tones with the cornucopia of four dedicated filter modules, including the classic ladder low pass filter and musical fixed filter bank. Modulation sources are equally comprehensive, with four ADSR envelopes, random signal generator, and the 960 sequential controller, which pairs with the 962 Sequential Switch to offer up to 24 steps of sequencing. In addition to five VCAs and numerous voltage utilities, the System 55 also features a MIDI to CV module, letting you control this massive system from your favorite controller or DAW via MIDI. With a total of 144HP of expandable space, you can go even deeper and expand your system with other Eurorack compatible modules. If you crave commanding a towering system of sound design potential with authentic vintage appeal, the Behringer System 55 is a perfect choice.

SYSTEM 55 Features

• Pre-assembled Eurorack modular system with 38 modules
• Vintage sounding designs inspired by east coast circuits from the 1970s
• Comprehensive system with multiple sound sources, modulation sources, and processors
• Modules included:
  • 6x 921B VCO with 2x 921A Oscillator Driver
  • 1x 921 VCO
  • 1x 914 Fixed Filter Bank
  • 1x 923 Filters with low and high pass filters
  • 1x 904B Voltage Controlled High Pass Filter and 1x 904A Voltage Controlled Low Pass Filter
  • 1x 992 Control Voltages for CV mixing / switching
  • 5x 902 Voltage Controlled Amplifier
  • 4x 911 Envelope Generator
  • 1x 911A Dual Trigger Delay
  • 1x 960 Sequential Controller
  • 1x 962 Sequential Switch
  • 1x CM1A Mifi to CV converter
  • 3x CP3A-O for oscillator CV mixing / switching
  • 3x CP3A-M mixer
  • 2x 995 Attenuators
  • 1x 903 Random Signal Generator
  • 1x CP35 Attentuators
  • 1x 961 Interface for V-trig / S-trig conversion
  • 5 Blank Panels
• 144HP of expandable space to add modules
• System housed in 2x Behringer EURORACK GO cases with PSU and connecting brackets